搜索
确认
取消
Language
Deyang Dongci Laser Cutting Machine
Laser cutting machining, hydropower and wind power supporting products, spot welding, coil glue
Current location:
Homepage
/
/
/
Maintenance of motor stator and rotor punching pieces

Maintenance of motor stator and rotor punching pieces

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2020-11-21
  • Views:0
(Summary description)

Motor stator and rotor punching sheet is continuously expanding in industrial use. In order to use it well, the editor will introduce some aspects that need attention in the maintenance of motor stator and rotor punching sheet:

Maintenance of motor stator and rotor punching pieces

(Summary description)Motor stator and rotor punching sheet is continuously expanding in industrial use. In order to use it well, the editor will introduce some aspects that need attention in the maintenance of motor stator and rotor punching sheet:

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2020-11-21
  • Views:0
Information

Motor stator and rotor punching sheet is continuously expanding in industrial use. In order to use it well, the editor will introduce some aspects that need attention in the maintenance of motor stator and rotor punching sheet:

1. If the thickness and unevenness of the ground test piece are found, check whether the grinding wheel plane is parallel downward.

2, regularly lubricate the working surface of the carriage to maintain normal operation.

3. If the grinding wheel is found to be out of alignment and out of round, use a cutter to correct the plane.

4. Regularly adjust the gap between the nut and the screw rod.

5. The motor punch is installed in an environment without vibration and no sources of corruption.

In the process of using many customers, due to improper maintenance, the stator and rotor blades fail and the service life is reduced. In order to properly maintain the motor stator and rotor blades:

1. The debris and debris on the surface of the stator and rotor punching table should be cleaned up in time and kept clean.

2. Please do not dismantle the parts and organization of the stator and rotor punching piece privately, so as not to affect the performance and reduce the service life.

3. Do not place the stator and rotor punching pieces in a humid environment to prevent leakage.

4. Please turn off the power when not doing the test for a long time.

Scan the QR code to read on your phone

Recommended information

Deyang Dongci Laser Cutting Electromechanical Co., Ltd.

Cooperation Hotline

0838-5700026

东慈激光切割机电

通用底部

Time of issue:2020-12-04 10:23:07

Copyright © Deyang Dongci Laser Cutting Electromechanical Co., Ltd. All Rights Reserved. 蜀ICP备xxxxxxxx号-1 Powerd by 300.cn chengdu.300.cn