The problem of how to maintain the stator and rotor blades of the motor has become a headache for people. So the editor will relieve you of your troubles. Next, I will introduce you the daily maintenance methods of the motor blades. I hope you will like it.

1. Motor punching is a relatively complicated mechatronics equipment, which requires special personnel to operate. Non-operators, please do not start the equipment casually.

2. The machine should be turned on frequently, especially in the rainy season.

3. Do not open the shell of the motor punching piece to touch the components, so as to prevent static electricity from penetrating the components, especially those wearing chemical fiber underwear.

4. The connecting rod bearing on the torque motor in the main engine should be refueled, generally once every 2 to 3 months, and the oil mist on the triplex should be checked for about a year. When it is lower than the oil level line, it needs to be refueled, generally to 2/3 height.

Motor punching is simple and convenient. It can be used for punching tensile test pieces and other various shapes of test pieces. Next, let us understand the use of motor punching and the structure of motor punching.

How to use the motor punch: put the cutter on the lower end of the feed shaft, make the cutting blade plane parallel to the machine base platform, open the air valve, and then punch into standard samples.

The structure of the motor punching sheet: it consists of a motor seat platform, a cylinder, an air valve, and an air compressor (optional).