搜索
确认
取消
Language
Deyang Dongci Laser Cutting Machine
Laser cutting machining, hydropower and wind power supporting products, spot welding, coil glue
Current location:
Homepage
/
/
/
What should be done when the motor stator and rotor present a load?

What should be done when the motor stator and rotor present a load?

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2020-11-21
  • Views:0
(Summary description)

We all know that a lot of heat will be generated when the motor is in use, and the parts inside will be overheated. Even when the motor is overloaded, it will load the stator and rotor of the motor.

What should be done when the motor stator and rotor present a load?

(Summary description)We all know that a lot of heat will be generated when the motor is in use, and the parts inside will be overheated. Even when the motor is overloaded, it will load the stator and rotor of the motor.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2020-11-21
  • Views:0
Information

We all know that a lot of heat will be generated when the motor is in use, and the parts inside will be overheated. Even when the motor is overloaded, it will load the stator and rotor of the motor. So what method should be adopted when the motor stator and rotor show a load? Next, Shijiazhuang Yihua Electromechanical Parts Co., Ltd. will tell you the factors that present this phenomenon and the correct way to deal with it.

One. Factors that cause the load scene of the stator and rotor of the motor:

1. The rotor temperature increases.

2. The rotor current and voltage exceed the rated value, and the stator current increases;

3. "Excitation Overload" light plate is high;

2. Treatment method of motor stator and rotor load:

1. Monitor the operation according to the rotor overload meter. For generators with higher stator and rotor coil temperatures during normal operation, the overload operation time should be appropriately shortened;

2. When the overload allowable time comes, the excitation will be reduced. If the excitation "automatic" adjustment fails, immediately adjust it "manually".

Scan the QR code to read on your phone

Recommended information

Deyang Dongci Laser Cutting Electromechanical Co., Ltd.

Cooperation Hotline

0838-5700026

东慈激光切割机电

通用底部

Time of issue:2020-12-04 10:23:07

Copyright © Deyang Dongci Laser Cutting Electromechanical Co., Ltd. All Rights Reserved. 蜀ICP备xxxxxxxx号-1 Powerd by 300.cn chengdu.300.cn