In the manufacturing process, due to the randomness of the motor stator and rotor bounce, it is prone to inaccurate positioning. Inaccurate positioning will not only cause inaccurate gear clamping, but also affect the subsequent use effect. Production work still has a relatively large impact, so let's introduce the harm to unevenness.

1. As the stator and rotor cores of the motor are not aligned directly, the effective iron length of the motor is insufficient, and the no-load current of the motor will increase, and the temperature rise of the motor will increase.

2. Due to the misalignment of the stator and rotor cores of the motor, the stator and rotor will automatically adjust the magnetic field lines after the motor is energized, which will cause the motor rotor axial mechanical position to periodically oscillate, the motor bearing grease is lost, the bearing is dry and burnt, causing the motor shaft Hold to death and burned.

3. The axial displacement of the motor or the impact of the movement and the equipment connected to the motor will also cause damage to the equipment.

4. Vibration and noise problems are aggravated or noise is generated.

The above is the introduction to the harm of the motor stator and rotor misalignment. We can understand that if there is misalignment, we must pay attention to corrective work in time to prevent the harm from further deepening, because this will not only affect the normal operation of the machine, but also It will also affect our work efficiency, so everyone should pay attention to it.